Photo by Max Vakhtbovych from Pexels

When you are in the pool installation process, it is important to understand what your options are. You have two main pool construction types- in-ground pool installation and above-ground pool installation. Which one do you want? An in-ground pool will cost more upfront but can be cheaper when maintenance comes into play over time.

Above ground, pools are cheaper upfront, but they require much more upkeep than an in-ground pool does and may not last as long of a lifetime. There’s no right answer here: the best option for you depends on your budget and how much work you’re willing to put into maintaining your pool!

What is a pool installation?

A pool installation is a process of putting in a pool whether it’s above ground or below.

It consists of excavating, pouring concrete (if you are using an in-ground pool), building steps into your pool, adding water lines to connect your pool equipment, and more!

This can be completed by yourself if you have experience with heavy equipment, pool equipment and more.

A pool installation is a big job that requires some training to ensure it’s done properly.

4 Pool Maintenance Tips

  1. Skim Debris and Clean out Baskets
  • Pool cleaners are only designed to remove the larger items from your pool. They do not have fine enough screens to skim smaller debris, so you will need to use a pool skimmer for this task
  • Take out leaves and other large pieces of debris first before removing any dirt or dust that has accumulated at the bottom of the pool
  • Pool cleaners can be a great source of maintenance. They allow you to clean the pool in half the time it would take if using a pole and net
  • When storing them away for winter, make sure they are completely dry so that water doesn’t get inside and ruin them during storage
  • Remove pool cleaners from the pool and let them dry completely before storing them away for winter.
  1. Vacuum the Pool and Brush Walls and Till

Now that you have finished vacuuming poolside’s, walls, and floor with the pool vacuum, it is time to brush poolsides, walls, and floor. It may seem like a mundane task but brushing pool surfaces actually has benefits for your pool’s hygiene. Brushing helps scrub off any dirt or debris on the surface of your pool.

Brushing pool surfaces also helps to prevent the growth of algae pool contractors near me. Brushing is an important part of pool maintenance, so it’s best not to skip this task when you are cleaning your pool.

  1. Clean the Pool Filter

The pool filter can become dirty and clogged over time. In order to keep the pool crystal clear, it is important to have a pool service professional clean your pool filter on a regular basis or before large debris starts to enter into the pool itself.

Even if you are not having any problems with your current pool filtration system, it is best to have pool service professionals clean the pool filter once every season. This is a great way to prevent potential problems in the future when pool maintenance may be less convenient or affordable for you.

  1. Professionally Service the Heater

A pool heater is a device that uses fuel to heat water for your pool. A pool heater can be gas- or oil-fired, with the latter being more expensive but also longer-lasting and safer than the former. There are two kinds of pool heaters: standard pool heaters use an energy source to create hot air which is directed to the pool, and pool heat pumps use electricity to pull hot air from outside of your home.

  • A pool heater is a device that uses fuel to heat water for your pool.
  • There are two kinds of pool heaters: Standard pool heaters use an energy source to create hot air which is directed to the pool, and pool heat pumps use electricity to pull hot air from outside of your home.
  • Pool heaters can be gas- or oil-fired, with the latter being more expensive but also longer lasting and safer than the former.

In Ground vs above ground Pool Installation

There are key differences between installing an above-ground pool and a ground pool. The type of pool you choose will depend on your location, the available space around the pool site, and how much time and money you wish to spend. If you have a limited budget or want it done as soon as possible then we recommend going for an above-ground pool.

On the other hand, if you have plenty of free time and money to spend then we recommend going for an in-ground pool. In addition, if your pool site is located on a flat surface such as concrete or asphalt then this will make it much easier to install an above-ground pool instead. It may also be worth talking with the local council to determine whether building a pool is even allowed in the area.

Conclusion

The pool installation process can be intimidating. There are so many things to consider, from the size of the pool and how it will look in your yard to who is going to do all that hard work for you!

Facebook
Twitter
Pinterest
Reddit
Telegram

NOW TRENDING